Laser show systems have revolutionized the entertainment industry, offering stunning visual effects that captivate audiences worldwide. A crucial component of these systems is the interface that connects the control software to the laser projectors. Traditionally, this has been done using ILDA cables. However, a new trend is emerging: the use of RJ45 to ILDA converters. This post will explore why this approach is more cost-effective and beneficial for laser show systems.
Understanding ILDA and RJ45
ILDA (International Laser Display Association) is a standard interface for laser show systems. It uses a DB25 connector and parallel transmission, requiring a Digital Analogue Converter (DAC) to convert the computer control signal. This means you end up with a USB cable attached to an ILDA Dongle, which to then use either an ILDA, or RJ45 Cable to connect the dongle to the Laser Unit Itself. ILDA is a protocol designated specifically for lasers, whereas, RJ45 is a standard connector used for Ethernet networking. It’s commonly used for internet connections and local area networks. RJ45 Cables are becoming more prevalent in the world of Lasers and laser show systems.
ILDA To RJ45 Adapter
These ILDA to RJ45 adapters are great, allowing you to use RJ45(ethernet) cables to bridge the long distances between your lasers and the computer that will be running them. RJ45 cables are just cheaper than ILDA cables, making this a very practical solution for large events!
The Shift to Converter Adapters
The shift to RJ45 converters for laser show systems is primarily driven by cost and convenience. ILDA cables are not only expensive but also difficult to find. You can however, find them in lengths up to 100 meters long in our shop. In contrast, RJ45 cables (network cables) are cheap and readily available. Making them a sensible choice for large laser show productions, and smaller shows too. Recently there have been some advancements in Wireless technology for laser show systems. There’s been a push by brands like Alien for Mobile App controlled laser show systems where you can control the content of the show from an app on your phone or tablet. This is an awesome advancement for people looking to get into lasers, and significantly lowers the barriers to entry.
ILDA(DB25) to USB Dongle with iShow Included
Elevate your festival experience with Our ILDA(DB25) to USB Dongle with iShow Included. This high-tech device is not just a dongle; it’s a game-changer that brings your performances to life.
Our ILDA to USB Dongle is designed to deliver a powerful performance in any festival setting. These dongles allow you to run iShow, which is included with the dongle, providing an intuitive and fast control of all connected fixtures and channels.
The Benefits of ILDA Converters
- Cost-Effective: RJ45 cables are significantly cheaper than ILDA cables. This makes the initial setup and maintenance of laser show systems more affordable.
- Availability: Network cables are widely available and can be found almost everywhere. This makes it easier to replace or extend the cables when needed.
- Flexibility: Using ILDA converters allows for greater flexibility in the setup of laser show systems. It enables digital streaming of laser show data between show-producing software, playback devices, projectors, and laser signal recorders.
- Ease of Use: ILDA converters are easy to use and do not require any special skills or knowledge. This makes them a practical choice for both professionals and hobbyists.
10 – 100 meter ILDA Cable
Elevate your festival experience with the 10 – 100 Meter ILDA Cable. This high-tech device is not just a cable; it’s a game-changer that brings your performances to life.
The 10 – 100 Meter ILDA Cable is designed to deliver a powerful performance in any festival setting. These cables are very useful in conjunction with a dongle to connect to your PC, allowing you to fully control your laser’s content, timing, and colours. Available in lengths from 10 Meters to 100 Meters, we have everything you need to create a unique and captivating light show that will leave your audience in awe.
In conclusion, the use of ILDA to RJ45 Converters in laser show systems offers a cost-effective, convenient, and flexible solution for controlling laser projectors. While ILDA cables have been the traditional choice, the shift to ILDA to RJ45 Converters is a testament to the continuous innovation in the laser show industry. Check out our shop to see our collection of Ravewear, and Stage Equipment, it’ll blow your mind!
RJ45 to DB25(ILDA) Converter
These ILDA adapters plug into the back of your lasers, and let you use RJ45(ethernet) cables to run your laser lights, so handy because ethernet cables are certainly cheaper than ILDA cables.
Make the selection for your quantity in the ‘colour’ selection box, it defaults to 5.
Available in sets of 5, 10, and 20