Getting started - Solstice - Ravers Co

Ravers Co DAW

← Solstice

Getting started with Solstice

A plain guide for DJs and producers coming to Solstice from Ableton Live, FL Studio, Logic or Rekordbox: how to install it, how to hear it, how to make a first track, and where to find the things you already know.

Two longer guides come straight from Solstice, each with its own search: Every setting explained and Every part of the window, every command and every key.

Download and install

Everything starts on the download page. Downloading needs a free Ravers Co account: if you are not signed in, the download button takes you to sign in first, and the file comes straight after. Go to the download page

On Windows

  1. Download the Windows version from the download page.
  2. If it is an installer (the file ending in .exe), open it from your Downloads folder. If it comes as a zip, right-click it, choose Extract All, and open the setup program in the folder it extracts to.
  3. Follow the installer. If there is a folder called payload beside the setup program, leave it be: a copy started from in there has no Start menu entry, no uninstaller and no update check.
  4. If Windows says it protected your PC, choose More info, then Run anyway.
  5. Start Solstice from the Start menu.

On a Mac

  1. Download the Mac version from the download page.
  2. If it is an installer (the file ending in .pkg), open it from your Downloads folder and follow it.
  3. If it is a disk image (the file ending in .dmg), open it, and in the window that opens drag Solstice onto the Applications folder.
  4. Open Solstice from your Applications folder. If your Mac will not open it the first time because it cannot check it, open System Settings, choose Privacy and Security, and choose Open Anyway.

The first time it opens

The first time Solstice opens, it asks you about three things, and then it gets out of your way.

The licence agreement

Solstice shows its licence agreement in the help panel and asks whether you accept it. It is a free, personal licence, tied to your Ravers Co account. You accept it once: choose I agree, and you are only asked again if the agreement itself changes. Quit closes Solstice and changes nothing.

To read it again later, open Help > About, which has a button for it. The same agreement is on this site.

Your key

Next it asks for your key. Your key is on your account page on this site, under My Account, Solstice, and Solstice offers to open that page for you. Paste the key in and Solstice checks it with us once; after that it works without the internet for 30 days at a time, and checks again quietly whenever you are online. The key is free, it is yours, and it works on every computer you own.

The first run wizard

Next, a short wizard sets Solstice up for your computer. Every step already has a sensible answer filled in, so pressing Next all the way through gives you a working setup.

  • Sound device: which output to play through. Press Test to hear a short tone through it.
  • Plugin folders: where your VST3 and CLAP plug-ins live. The usual folders are filled in when they exist, and you can add your own.
  • Sample library: the folder the browser shows first. Nothing is moved or copied.
  • Keyboard shortcuts: which set of keys to start with. If your hands already know another program, pick the profile closest to it.
  • Checking for updates: whether to ask our site for newer versions, with exactly what a check sends spelled out.

Everything you choose here can be changed later under Window > Settings.

Hear it first

When the wizard is done, the welcome screen opens. You can bring it back whenever you like with File > Welcome Screen.

Under Start, choose First listen. It is a built-in demo: eight bars of drums, bass, chords and a lead, made only from the instruments and effects inside Solstice. When it opens, press the space bar to play it, and press it again to stop.

The Solstice welcome screen, offering an empty project, the First listen demo and your recent projects.(opens full size in a new tab)
The welcome screen. Start an empty project, open the built-in demo, or pick up a project you had open.

First listen is saved into your own projects folder, so it is yours to pull apart. Mute a track, move some notes, swap a sound, and see how it was put together.

The Solstice arrangement with the First listen demo open, its tracks and clips laid out across eight bars.(opens full size in a new tab)
First listen, the built-in demo, open in the arrangement: eight bars of drums, bass, chords and a lead.

Make a track from nothing

Choose Empty project on the welcome screen. It starts you off with some named tracks ready to record into, and asks where to save only when you first save. The steps below add one track of each kind, so you can see how each works.

Bring in a sound

Track > Add Audio Track (Ctrl+T) puts an audio track under the one you have selected. To put a sound on it, choose File > Import Audio File and pick a file: it lands at the playhead, on the selected audio track. You can also drag audio files from a folder or your desktop straight onto the arrangement. Solstice opens WAV, AIFF, FLAC, MP3, Ogg Vorbis, Opus, AAC, AC-3, DTS, MP4 and MKV soundtracks.

Play some notes

Track > Add Instrument Track (Ctrl+Shift+T) adds a track that plays the synth built into Solstice. Double-click an empty spot on that track's lane in the arrangement to make a clip, and the piano roll opens on it.

Double-click the grid to add a note, or press 2 for the draw tool and click (1 goes back to selecting, and 3 is the eraser). Drag a note to move it, drag its end to change its length, and set how hard each note plays in the velocity lane underneath. View > Show Piano Roll (Ctrl+Alt+5) opens it again on whichever clip is selected.

The Solstice piano roll, with notes on a grid beside a keyboard and a velocity lane below them.(opens full size in a new tab)
The piano roll, with a keyboard down the side and the velocity of every note underneath.

Program a beat

Track > Add Drum Track (Ctrl+Shift+D) adds a track that plays the drum kit built into Solstice, so there are no samples to hunt down. Double-click its lane to make a clip, then choose View > Step Grid (Ctrl+Shift+G). Each lane is one piece of the kit: click a step to switch it on, or drag along a lane to paint a run of them.

The Clip menu holds the pattern tools, among them Fill Every Fourth Step, Shift the Lane Left, More Swing, Humanise the Lane and Double the Pattern Length. A lane can have its own number of steps too (More Steps in This Lane), so a seven-step hat can drift against a sixteen-step kick and come back round.

The Solstice step grid, with rows of steps for each drum and some of them switched on to make a beat.(opens full size in a new tab)
The step grid: a lane for each piece of the built-in drum kit. Click a step to switch it on.

Add effects, and mix

Select a track and choose Track > Add Plug-in. A list opens with a search box at the top. The effects built into Solstice are in it, and so are the plug-ins found in your plug-in folders. Pick one and it goes on the end of that track's chain. Plug-ins work as VST3 and CLAP on Windows and as CLAP on a Mac, where VST3 does not load yet. On an instrument track, an instrument plug-in plays the clips and the keys you play, in place of the track's built-in instrument.

View > Show Device Chain (Ctrl+Alt+6) shows the chain from left to right, in the order the sound goes through it. Drag a device to change the order. A plug-in's own window opens with Window > Plug-in Window, for the device the inspector is showing.

View > Show Mixer (Ctrl+Alt+4) gives every track a fader, pan, mute, solo and meter. Double-click a fader to put it back to unity, or a pan to put it back in the middle.

The Solstice mixer, a row of channel strips with faders, pan controls and level meters.(opens full size in a new tab)
The mixer: a fader, pan, mute, solo and meter for every track.

Automate a control

Put the playhead where a change should happen, set the track's fader (or its pan) where you want it, and choose Track > Write a Level Point Here (or Write a Pan Point Here). Do that at a few places, play it back, and the fader follows.

Panels > Show or Hide Automation shows the curves for the selected track: double-click for a new point, drag a point to move it, and drag the middle of a segment to bend it. Track > Clear This Track's Automation takes them all off again.

Loop a section

Drag along the loop bar at the top of the ruler over the bars you want, and switch looping on and off with Transport > Toggle Loop (Ctrl+L). Drag either end of the loop bar to change where it starts or stops.

Export it

Save your project with File > Save (Ctrl+S). When it is ready to share, File > Export Audio (Ctrl+Shift+E) renders the whole arrangement, from the start, to one audio file. Type a name and choose a folder; the ending you give the name picks the format, such as .wav or .flac. The formats it can write are WAV, AIFF, FLAC, Ogg Vorbis and Opus, plus MP3 and AAC on Windows.

Coming from other software

Most of what you know carries straight over. This is where the familiar things are.

If you are used toIn SolsticeKey
Arranging a song: the Arrangement View in Ableton Live, the Playlist in FL Studio, the tracks area in LogicThe arrangement: View > Show Arrangement.Ctrl+Alt+1
Launching clips, as in the Session View in Ableton LiveThe session grid: View > Show Session. With it in front, Enter launches the selected clip.Ctrl+Alt+2
Two decks, cues and sync, as in RekordboxThe decks, with a mixer between them: View > Show Decks. With the decks in front, Q plays or pauses, W cues, E syncs, A and S set a loop in and out, 1 to 8 are hot cues, and Shift with 1 to 8 clears one. Each deck shows its BPM and key, and a record's cue point and hot cues come back when you load it again. For the headphone cue, choose Settings > Audio device > Headphone cue: outputs 3 and 4 of an interface with four outputs, or a Y cable that splits one output; then press Cue on a channel, and the cue mix and phones knobs set what you hear and how loud. Deck > Record the Set records what goes to the speakers. This beta has no key lock in the sound yet.Ctrl+Alt+3
The mixerView > Show Mixer.Ctrl+Alt+4
The piano roll, or a MIDI editorView > Show Piano Roll, on the selected clip.Ctrl+Alt+5
Programming drums on steps, as in the Channel rack in FL Studio or the Step Sequencer in LogicA drum track and the step grid: Track > Add Drum Track, then View > Step Grid.Ctrl+Shift+D Ctrl+Shift+G
Effects on a track: devices in Ableton Live, mixer inserts in FL Studio, plug-in slots in LogicThe device chain: Track > Add Plug-in adds one, and View > Show Device Chain shows them in order.Ctrl+Alt+6
A loop brace, or the cycle area in LogicDrag along the loop bar on the ruler, then Transport > Toggle Loop.Ctrl+L
Bouncing or exporting a mixFile > Export Audio.Ctrl+Shift+E
MIDI learnEdit > Map a Controller, with the pointer on the control you want it to move.
Finding a command when you do not know where it livesView > Command Palette: type part of its name and run it.Ctrl+Shift+P
Your old projectsSolstice cannot convert an Ableton Live, FL Studio or Logic project yet. Export each track from your old software as its own audio file, all starting at the same point, and bring them in together with File > Import Stems Folder. MIDI files come in with File > Import MIDI File.
The keys your hands already knowWindow > Next Keyboard Profile moves between the keyboard profiles that ship, and Help > Keyboard Shortcuts lets you change any key.Ctrl+F1

Keyboard basics

Keys on this page are written the Windows way. On a Mac, press Command wherever it says Ctrl, and Option wherever it says Alt. The few that differ by more than that are given both ways.

KeyWhat it does
SpacePlay, or stop if it is already playing
Shift+SpaceStop, and leave the playhead where it is
Ctrl+ZUndo
Ctrl+Shift+ZRedo
Ctrl+SSave
Ctrl+Shift+SSave As
Ctrl+NNew Project
Ctrl+Shift+PCommand Palette: search every command by name
F1The manual
Ctrl+F1Keyboard Shortcuts: see every key, and change any of them
Ctrl+Alt+P on Windows, Command+, on a MacSettings
F11 on Windows, Command+Shift+F on a MacFull Screen
Ctrl+Alt+Shift+R on Windows, Command+Option+Shift+R on a MacReport a problem

When something goes wrong

Press Ctrl+Alt+Shift+R on Windows, or Command+Option+Shift+R on a Mac, from anywhere in Solstice to open Report a problem. It is on the Help menu too, as Report A Problem.

It asks what you were doing when it went wrong. Then it shows you the whole report before anything leaves: what you wrote, a description of your computer (its processor, memory, graphics, displays and audio devices), and the end of the Solstice log with your name, your computer's name and your folders taken out. Your licence key goes with it, if you have entered one, so that a reply can reach you. Your music, your projects and your recordings are never in it.

Nothing is sent unless you choose to send it. If you don't, the report is kept on your computer and Solstice tells you where, so you can attach it to an email to [email protected] instead. Report a problem offers it to you again next time, too.

AI

There is no AI built into Solstice at this time. Nothing you make, play or record is sent to any AI service.

AI features could come in the future, if that is what the people using Solstice want. If you would like them, or would rather they stayed out, tell us. Use the Tell us what to build next form on the download page.

Getting help

  • The Help menu. Manual (F1) opens the manual inside Solstice. Keyboard Shortcuts (Ctrl+F1) shows every key and lets you change any of them. Why is the audio breaking up shows what your audio device has measured and which plug-in is taking the most time. Save a Support File writes a description of your computer and your session, with names taken out, to a file you can read before you send it to anyone.
  • Explanations on hover. Rest the pointer on a control to find out what it does. Shift+F1 steps the explanations between everything, one line and off.
  • The two long guides, which the Help menu also opens: Every setting explained, Every part of the window, every command and every key.
  • The problem report key: Ctrl+Alt+Shift+R on Windows, Command+Option+Shift+R on a Mac. What it sends
  • Email [email protected]. Tell us which version you have (Help > About shows it) and what you were doing, and someone who works on Solstice will write back.
  • The bug report form below, for when you would rather write it here.

Report a bug

Tell us what went wrong in Solstice. A person who works on it reads every report and replies by email.

This form takes words only. To send the full technical report, with a description of your computer and the end of the log, press Ctrl+Alt+Shift+R in Solstice (Command+Option+Shift+R on a Mac). That is Report A Problem: it shows you the whole report and sends nothing unless you choose to.

Download Solstice

Read the licence

Checkout