Solstice settings guide

Every setting, what it does, and what it starts as.

Every setting, page by page, in the order the Settings window shows them. Open Settings from the menu (or the command palette, by typing settings), and use its search box with the same words you would type here. A setting marked advanced is hidden from browsing in the window but still found by its search. A setting marked restart takes effect the next time the program starts.

Audio device

Which sound device to use, and how quickly it responds.

Device

Play through

The device to play out of. Leave it empty to use whatever this computer says is its own default.

Text. Starts as: (empty). Where: Settings, Audio device, Device. Name in the settings file: audio.device

outputsoundcardinterfacespeakersheadphonesdefault

Play from

The keyboard or controller to play instruments from. Leave it empty to use the first one this computer can see.

Text. Starts as: (empty). Where: Settings, Audio device, Device. Name in the settings file: midi.input

midikeyboardcontrollerkeysinputnotes

Driver type

A low latency driver responds fastest. Shared Windows audio always works and lets other applications make sound at the same time.

One of: Low latency driver, Windows Audio, exclusive, Windows Audio, shared, No audio device. Starts as: Low latency driver. Where: Settings, Audio device, Device. Name in the settings file: audio.device.api

asiowasapidriversoundcardinterface

Buffer size

Smaller responds faster but asks more of the computer. Raise it if you hear clicks or crackling.

A whole number from 16 to 4096. Starts as: 256. Where: Settings, Audio device, Device. Name in the settings file: audio.device.buffer

latencydelaylagcrackleclicksdropoutsamples

Sample rate

Higher uses more of the computer for very little audible gain. 48000 suits almost everything.

A whole number from 44100 to 192000. Starts as: 48000. Where: Settings, Audio device, Device. Name in the settings file: audio.device.samplerate

khzqualityrate

Headphone cue

Headphone cue

How you hear the next track in headphones while the room hears the current one. Separate outputs puts the cue on outputs 3 and 4 of an interface with four outputs. Split cue puts the master on the left and the cue on the right of one output, for a Y cable.

One of: None, Separate outputs, Split cue on one output. Starts as: None. Where: Settings, Audio device, Headphone cue. Name in the settings file: audio.cue.topology

djmonitorpreviewheadphonespfl

Control surface

Control surface

A desk with faders and lit buttons that follows the mix and moves it. Choose the desk, or let the program work it out from what the desk says it is. Every desk in the list is a table, and a table for a desk that is not here yet is a file put in the Surfaces folder: the program does not have to be updated. The command Get Controller Tables fetches the current tables from the Ravers site; it asks only when you run it. A control no table covers is mapped one at a time, by pointing at something and pressing the learn key.

One of: Off, Work it out from the desk, Eight faders with displays, Eight by eight pad grid, Mackie Control layout (the list is what this computer has now). Starts as: Off. Where: Settings, Audio device, Control surface. Name in the settings file: midi.surface

midisurfacecontrollerdeskcontrolfadermackiemcuhuilaunchpadpadsfeedbackmotorisedtabledetecthardwaregetfetchdownloadpack

Send to

The MIDI output the surface listens on. Nothing is sent until one is chosen: a desk protocol sent to the wrong output is noise going into whatever is on the other end of it.

One of: Not chosen (the list is what this computer has now). Starts as: Not chosen. Where: Settings, Audio device, Control surface. Name in the settings file: midi.surface.port

midisurfaceoutputportcontrollerdesk

Listen on

The MIDI input the surface sends on. A desk needs one of its own, apart from the keyboard: its buttons arrive as notes, and on the keyboard's input a note is played. Without one the faders and knobs of a desk still work through the keyboard's input, and its buttons do not.

One of: Not chosen (the list is what this computer has now). Starts as: Not chosen. Where: Settings, Audio device, Control surface. Name in the settings file: midi.surface.input

midisurfaceinputportcontrollerdeskbuttons

MIDI clock

Send MIDI clock to

The MIDI output a drum machine, a sequencer or anything else that follows a clock is plugged into. It is told when the transport starts and stops and where in the song it starts from, and is sent the clock it keeps time to, counted from the same samples the sound is made from so the two do not drift apart. Nothing is sent until an output is chosen, and Not chosen turns it off again. It cannot be the output a control surface is on.

One of: Not chosen (the list is what this computer has now). Starts as: Not chosen. Where: Settings, Audio device, MIDI clock. Name in the settings file: midi.clock.port

midiclocksynctempooutputportdrum machinesequencerexternalstartstopsong positionslavefollow

Plugins

Where your plugins live and how they are loaded.

Where to look

Plugin folders

Folders searched for plugins, one per line.

Text. Starts as: (empty). Where: Settings, Plugins, Where to look. Name in the settings file: plugins.folders

vstclappathscandirectory

Extra preset folders

More folders to search for presets, one per line. Your own preset folder, the presets that came with the program and the ones sitting beside your plugins are all searched already.

Text. Starts as: (empty). Where: Settings, Plugins, Where to look. Name in the settings file: presets.folders

presetpatchsoundbankvstpresetfxpfolder

Scanning

Look for new presets at startup

Builds the preset list in the background while you work. Turn it off if you keep a very large library on a slow drive and would rather ask for it yourself.

On or off. Starts as: On. Where: Settings, Plugins, Scanning. Name in the settings file: presets.scanonstart

presetscanstartupslow

Look for new plugins at startup

Checks for plugins you have installed since last time. Turn it off if startup is slow.

On or off. Starts as: On. Where: Settings, Plugins, Scanning. Name in the settings file: plugins.scanonstart

scanstartupslow

Skip a plugin that has crashed while being examined

A plugin that takes this application down while it is being scanned is given one more try and then left alone until its file changes.

On or off. Starts as: On. advanced. Where: Settings, Plugins, Scanning. Name in the settings file: plugins.crashguard

crashsafequarantineskip

Recording

What happens when you arm a track and press record.

Before recording

Count-in

Bars of click before recording starts. Zero begins immediately.

A whole number from 0 to 8. Starts as: 1. Where: Settings, Recording, Before recording. Name in the settings file: record.countin

clickmetronomepre-rollcountdown

Timing

Line recordings up automatically

Moves what you record earlier by the round trip through the sound device, so it lands where you played it.

On or off. Starts as: On. Where: Settings, Recording, Timing. Name in the settings file: record.compensate

latencyoffsetalignlatetiming

Editing

How the mouse, the grid and the tools behave.

Grid

Snap to grid

Dragging lines things up to the grid.

On or off. Starts as: On. Where: Settings, Editing, Grid. Name in the settings file: edit.snap

quantisemagnetgrid

Undo

Steps of undo

How far back you can undo. More uses more memory.

A whole number from 10 to 5000. Starts as: 200. advanced. Where: Settings, Editing, Undo. Name in the settings file: edit.undolevels

historymemory

Appearance

Colours, sizes and how much the interface shows at once.

Theme

Appearance

Studio is dark for long sessions. Stage is brighter and higher contrast for a dark venue. Daylight is for working outdoors.

One of: Studio, Stage, Daylight. Starts as: Studio. Where: Settings, Appearance, Theme. Name in the settings file: ui.appearance

themedarklightcolourcolorcontrast

Size

Interface size

Makes everything larger or smaller.

A number from 0.75 to 2. Starts as: 1. Where: Settings, Appearance, Size. Name in the settings file: ui.scale

zoomdpibiggersmallertext size

Files and folders

Where projects, recordings and samples are kept.

Projects

Open project files with this program

Tells Windows that project files belong to this program, so a double click opens them. Only for your account, and switching it off puts back whatever was there before.

On or off. Starts as: Off. Where: Settings, Files and folders, Projects. Name in the settings file: files.associate

filetypeassociationdouble clickopendefault

Export

Bit depth

What a bounce is written at. 16 bit is what a delivery is and is dithered on the way down; 24 bit is what an archive is; 32 bit float cannot clip and is what to hand somebody who will work on it further.

One of: 16 bit, 24 bit, 32 bit float. Starts as: 24 bit. Where: Settings, Files and folders, Export. Name in the settings file: export.bitdepth

bouncerendermixdownwavdithermaster

File format

What kind of file an export is. WAV, AIFF and FLAC keep every sample; FLAC is about half the size. MP3 and AAC are small files for sending and listening, and lose detail to get there; Opus is smaller still for the same quality, and Ogg Vorbis is what games and some players want. Opus and Ogg Vorbis are written by the Xiph libraries beside the program, and by FFmpeg where those are missing. MP3 and AAC are written on Windows, and on a Mac only where FFmpeg is installed. A file name ending in one of these formats is written as that format whatever this says.

One of: WAV, AIFF, FLAC, MP3, AAC (M4A), Opus, Ogg Vorbis. Starts as: WAV. Where: Settings, Files and folders, Export. Name in the settings file: export.format

bouncerendermixdownmp3flacaiffaacm4awavopusoggvorbis

MP3, AAC, Opus and Vorbis quality

How many bits a second a compressed export uses. More is closer to the mix and a bigger file; 320 kbps is as good as MP3 gets. Windows writes AAC at up to 192 kbps, and a higher choice is written at 192.

One of: 128 kbps, 192 kbps, 256 kbps, 320 kbps. Starts as: 320 kbps. Where: Settings, Files and folders, Export. Name in the settings file: export.bitrate

bitratekbpsmp3aacqualitycompression

Keep what is still ringing

How long an export will go on past the last clip while something is still sounding, so a reverb or a delay is not cut off part way through. It stops as soon as the sound has died away, so this is a limit rather than an amount added: a mix that goes quiet straight away adds nothing whatever this says. None stops at the last clip, which is what somebody delivering stems to a grid wants.

One of: None, 2 seconds, 10 seconds, 30 seconds, 2 minutes. Starts as: 30 seconds. Where: Settings, Files and folders, Export. Name in the settings file: export.tail

tailreverbdecayreleasebouncerenderexportringfade

Locations

Projects folder

Where new projects are saved unless you choose somewhere else.

A folder. Starts as: (empty). Where: Settings, Files and folders, Locations. Name in the settings file: files.projects

savedocumentslocation

Sample library folder

Where your own sounds are kept. The browser lists it beside the folders the product makes, next time you start. This is the folder the first run asked about.

A folder. Starts as: (empty). restart. Where: Settings, Files and folders, Locations. Name in the settings file: files.samples

samplessoundslibrarybrowserlocation

Converter

FFmpeg

The copy of ffmpeg.exe to use for files nothing else here reads, with ffprobe.exe beside it. Leave it empty to use the copy beside the program or the one Windows finds on its search path.

A file. Starts as: (empty). Where: Settings, Files and folders, Converter. Name in the settings file: files.converter

ffmpegffprobeconvertercodecopuswavpackvideo

Safety

Save a recovery copy every

Minutes between recovery saves. Your own file is not touched.

A whole number from 1 to 60. Starts as: 5. Where: Settings, Files and folders, Safety. Name in the settings file: files.autosave

backupcrashrecoverautosave

Performance

How much of the machine to use, and what to do under load.

Processing

Processing threads

How many processor cores to use for audio. Zero picks a sensible number for this machine. This one takes effect the next time the application starts.

A whole number from 0 to 32. Starts as: 0. restart, advanced. Where: Settings, Performance, Processing. Name in the settings file: perf.threads

corescpumulticoreparallel

While recording

Bypass slow effects while recording

Temporarily takes effects with a long delay out of the path so what you play is heard immediately. They come back when you stop.

On or off. Starts as: On. Where: Settings, Performance, While recording. Name in the settings file: perf.lowlatencymode

monitorlatencydirectlive

Visuals

Tell visuals software the tempo and the beat

Sends the tempo, the beat, the bar and the moments the music starts and stops to a visuals application on this machine or on the network, so the lights and the projections run in time with your arrangement. Off sends nothing at all. Resolume fills in its own addresses for you.

One of: Off, Resolume, Ravers Co, Custom. Starts as: Off. Where: Settings, Performance, Visuals. Name in the settings file: visuals.profile

visualsresolumevjosclightsprojectiontouchdesignermadmappervdmxnotchsync

Visuals computer

The name or address of the machine running the visuals. Leave it as localhost when the visuals are on this computer.

Text. Starts as: 127.0.0.1. Where: Settings, Performance, Visuals. Name in the settings file: visuals.host

visualshostaddressipnetwork

Visuals port

The port the visuals application is listening on. Resolume uses 7000 unless somebody changed it.

A whole number from 1 to 65535. Starts as: 7000. Where: Settings, Performance, Visuals. Name in the settings file: visuals.port

visualsportosc

Address for the tempo

Where the tempo is sent. Clear it to stop sending the tempo.

Text. Starts as: (empty). advanced. Where: Settings, Performance, Visuals. Name in the settings file: visuals.address.tempo

visualsoscaddresstempo

Address for the beat

Where a pulse is sent on every beat. Clear it to stop sending beats.

Text. Starts as: (empty). advanced. Where: Settings, Performance, Visuals. Name in the settings file: visuals.address.beat

visualsoscaddressbeat

Address for the bar

Where the bar number is sent at the start of each bar. Clear it to stop sending bars.

Text. Starts as: (empty). advanced. Where: Settings, Performance, Visuals. Name in the settings file: visuals.address.bar

visualsoscaddressbar

Address for starting

Where a message is sent when playback starts.

Text. Starts as: (empty). advanced. Where: Settings, Performance, Visuals. Name in the settings file: visuals.address.play

visualsoscaddressplaystart

Address for stopping

Where a message is sent when playback stops.

Text. Starts as: (empty). advanced. Where: Settings, Performance, Visuals. Name in the settings file: visuals.address.stop

visualsoscaddressstop

Updates

How updates are checked for and installed.

Your copy

Your key

The key from your account page at ravers.co.nz, under My Account. It is free, it is one key for all your machines, and the program needs it to start: it is checked online once, then works without the internet for thirty days at a time. It also attaches your problem reports and feedback to you.

Text. Starts as: (empty). Where: Settings, Updates, Your copy. Name in the settings file: licence.key

licencelicensekeyaccountactivationbetaregistersign in

Registered to

Whose account this copy was last checked against. Filled in by the website, not by you.

Text. Starts as: (empty). advanced. Where: Settings, Updates, Your copy. Name in the settings file: licence.holder

licenceaccountregisteredholder

Licence agreement accepted

Which licence agreement you accepted, and the day you accepted it. Filled in when you accept it, not by you; Help, About, Licence shows the agreement.

Text. Starts as: (empty). advanced. Where: Settings, Updates, Your copy. Name in the settings file: licence.accepted

licencelicenseagreementtermsacceptedeula

Key confirmed

When ravers.co.nz last confirmed your key. A confirmed key works for thirty days without the internet, and is checked again quietly whenever you are online. Filled in by the website, not by you.

Text. Starts as: (empty). advanced. Where: Settings, Updates, Your copy. Name in the settings file: licence.verified

licencekeyconfirmedverifiedoffline

Last checked

When the key was last checked against your account.

Text. Starts as: (empty). advanced. Where: Settings, Updates, Your copy. Name in the settings file: licence.checked

licencecheckedwhen

Checking

Check for updates

Asks the website whether a newer version exists. Nothing about you or your projects is sent. A newer version is downloaded in the background as soon as it is found, without asking, and nothing is installed until the setting below says so. Never sends nothing and downloads nothing.

One of: When the application starts, Once a week, Never. Starts as: When the application starts. Where: Settings, Updates, Checking. Name in the settings file: updates.check

versionupgradenew

Installing

When to install an update that has downloaded

Straight away restarts and installs it as soon as it has downloaded, without asking. On closing asks you once whether to restart now, and if you say no it is installed when you quit. Neither one restarts or asks while something is playing or recording.

One of: When I close the application, Straight away. Starts as: When I close the application. Where: Settings, Updates, Installing. Name in the settings file: updates.install

restartquitlaterdefer

Test builds

Offer me test builds

Test builds get new things first and break more often. With this on you are offered a test build when there is one newer than the last finished release, and finished releases the rest of the time, so turning it on never stops updates. Off unless you want to help find problems.

On or off. Starts as: Off. advanced. Where: Settings, Updates, Test builds. Name in the settings file: updates.beta

betapreviewinsidertestunstable

Privacy

What leaves this computer, which is very little.

Reporting

Send a report if the application crashes

Never your projects, your audio or your files. It sends what went wrong, and, if you have entered a beta key, that key and this computer's installation number, so the report can be matched to the machine it came from. You are shown the whole report before it goes.

On or off. Starts as: Off. Where: Settings, Privacy, Reporting. Name in the settings file: privacy.crashreports

telemetrydiagnosticsprivacydata

Advanced

Rarely needed. Everything here has a sensible default.

Sample scaling

Reading our own WAV files

How loud a WAV this program recorded, froze or left as a working file is taken to be. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.wav.read

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Reading our own WAV files: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.wav.read.custom

pcmscalescalingfull scalecustomleveldepthbits

Recording and freezing to WAV

How loud a WAV this program records or freezes comes out. Leave this and the one above matching unless you know why you are not. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.wav.write

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Recording and freezing to WAV: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.wav.write.custom

pcmscalescalingfull scalecustomleveldepthbits

Reading imported WAV and AIFF

How loud a WAV, RF64 or AIFF you import or drag in is taken to be. This is a different reader from the one above, which only ever sees our own files. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.file.read

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Reading imported WAV and AIFF: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.file.read.custom

pcmscalescalingfull scalecustomleveldepthbits

Exporting WAV and AIFF

How loud an exported WAV or AIFF comes out. This is the only AIFF writer, and a different one from recording and freezing above. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.file.write

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Exporting WAV and AIFF: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.file.write.custom

pcmscalescalingfull scalecustomleveldepthbits

Reading files through Windows

How loud anything Windows opens for us is taken to be: the formats this program does not read itself. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.windows.read

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Reading files through Windows: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.windows.read.custom

pcmscalescalingfull scalecustomleveldepthbits

Handing audio to Windows' encoders

How loud the audio is that goes into Windows' own MP3 and AAC encoders. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.windows.encode

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Handing audio to Windows' encoders: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.windows.encode.custom

pcmscalescalingfull scalecustomleveldepthbits

Recording through an ASIO driver

How loud what comes in from an ASIO sound card is taken to be. An ASIO driver may report eighteen or twenty bit samples, which the custom box below can be set for. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.asio.in

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Recording through an ASIO driver: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.asio.in.custom

pcmscalescalingfull scalecustomleveldepthbits

Playing through an ASIO driver

How loud what goes out to an ASIO sound card is. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.asio.out

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Playing through an ASIO driver: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.asio.out.custom

pcmscalescalingfull scalecustomleveldepthbits

Playing through Windows audio

How loud what goes out through Windows' own audio is, when an ASIO driver is not in use. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.wasapi.out

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Playing through Windows audio: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.wasapi.out.custom

pcmscalescalingfull scalecustomleveldepthbits

Reading Matroska and WebM

How loud the audio inside an mkv or a webm is taken to be. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.matroska.read

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Reading Matroska and WebM: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.matroska.read.custom

pcmscalescalingfull scalecustomleveldepthbits

Reading MP3 files

How loud an MP3 this program decodes itself is taken to be. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.mp3.read

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Reading MP3 files: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.mp3.read.custom

pcmscalescalingfull scalecustomleveldepthbits

Reading FLAC files

How loud a FLAC is taken to be. Worth setting if you have a library of FLACs made by something that used the other answer. FLAC files can be any depth from four to thirty two bits, and the custom box below takes any of them. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.flac.read

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Reading FLAC files: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.flac.read.custom

pcmscalescalingfull scalecustomleveldepthbits

Writing FLAC files

How loud a FLAC this program writes comes out. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.flac.write

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Writing FLAC files: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.flac.write.custom

pcmscalescalingfull scalecustomleveldepthbits

Writing a recording from the decks

How loud a recording of a deck set comes out. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.recorder.write

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Writing a recording from the decks: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.recorder.write.custom

pcmscalescalingfull scalecustomleveldepthbits

Measuring a file to draw it

How loud a file is taken to be while its waveform is measured and stored. This changes the picture and the beat detection, never the sound, and changing it makes every waveform already measured be measured again. Standard is what almost every other program uses and is what you want unless you have a reason not to. Exact round trip is a hair quieter and makes files other programs wrote read a hair quiet.

One of: Standard (AES), Exact round trip, Custom. Starts as: Standard (AES). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.analysis.overview

pcmscalescalingfull scalelevelgain3276732768aesdbfsheadroomclipconvention

Measuring a file to draw it: custom numbers

Only used when the answer above is Custom. One or more depth=number pairs, as in "16=30000, 24=8000000": the number is what a float one point zero is multiplied by at that depth. Any depth from 4 to 32 bits may be set, and a depth left out of the line uses the standard. Leave the whole line empty to use the standard everywhere.

Text. Starts as: (empty). advanced. Where: Settings, Advanced, Sample scaling. Name in the settings file: pcm.scale.analysis.overview.custom

pcmscalescalingfull scalecustomleveldepthbits

Diagnostics

Detailed logging

Records far more about what the application is doing. Slower, and only useful when chasing a problem.

On or off. Starts as: Off. advanced. Where: Settings, Advanced, Diagnostics. Name in the settings file: advanced.logging

debugverbosetracelog